This blog will show you how to read Renault Megane Siemens ems 3132 sirius 32 ECU by Galletto 1260 ECU chip tuning interface. Check below steps to start!
Before connecting the Galletto 1260 you must copy the software from the disc and add it to the desktop on your laptop.
To use the software, connect the USB end of the Galletto 1260 into the laptop.
Connect the 16 pin end of Galletto 1260 to car OBD diagnostics port. This is usually beneath the steering wheel in the fuse compartment.
Open the program named 'New Serial'. Wait 30 seconds.
Switch on the ignition key to second position, but please don't start the engine.
Select “RENAULT” and “SIRIUS 32 EURO 3 29F200BB”.
Select car model.
Click “ECU Data” and Galletto 1260 Flasher starts read ECU data. Wait it complete 100%.
Click “Read ECU” and then you can name the programming data file you want to save.
When finished, it will tell you to switch off the ignition and wait for ten seconds
Switch off the ignition and then click ok. Wait ten seconds, then switch on and press ok.
Galletto 1260 successfully read Renault Megane Siemens ems 3132 ECU!
You should now have a copy of your original file on your laptop.
C'est à partir de ECU Programmeur Auto support technique:
没有评论:
发表评论